The 18 Best Long Range Outdoor Wireless Access Point everyone must have in 2024

1.3 GHz dual-core processor (now upgraded to support full-duplex 1 Gbps TCP/IP performance).

Four-stream high-efficiency Wi-Fi 6 technology.

5 GHz band 4x4 MU-MIMO and OFDMA with radio rate of 2.4 Gbps.

2.4 GHz band 4x4 MIMO with radio rate of 600 Mbps.

Powered with 802.3at PoE (PoE injector not included).

CPE450 is a 5.8G Long Range WiFi Extender Outdoor Wireless Bridge CPE with an LED display. Point-to-point pairing can be done by dialing without having to access the GUI, avoid the complex setup program, save much human work and cost, and make the long-range wireless coverage, data transmission and wireless monitoring simple and professional

100Mpbs digital display bridge, transmission/receiver automatic networking, support point-to-point, point-to-multipoint, transmission/receiver flexible switching. WDS networking mode, video network dual compatible.Deep protocol optimization for wireless video surveillance transmission to ensure high-speed video transmission and smooth video surveillance, and the underlying wireless driver is optimized in-depth, with stronger anti-interference ability and better stability

Adopting low power consumption and high-performance design, the RF index and radiation index are in full compliance with national standards(FCC). Supports dynamic MIMO power saving mode (DMPS) and automatic power-saving transmission (APSD)， supports 24V POE power supply, is easy to install and deploy, simplifies construction, safe and reliable

Automatic power adjustment to adapt to environmental changes, ensuring smooth video regardless of ultra-close distance, transmission distance up to 3km(Barrier-free), actual application distance should be less than 3KM

The FCC ID: 2A6EJ-CPE450, This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Accurate Operating Frequencies: The frequency range that complies with FCC Rule Parts 15E is 5180.1-5240.0 MHZ and 5745.0-5825.0 MHZ

【Superior Speeds with MU-MIMO】Equipped with the latest 802.11ac Wave 2 MU-MIMO technology, the EAP225-Outdoor easily delivers dual-band Wi-Fi speeds of up to 1200 Mbps to multiple devices at the same time.

【Indoor/Outdoor Use】The durable, weatherproof enclosure protects the access point against harsh outdoor conditions and provides stable wireless coverage up to 200m+ range at 2.4GHz and 300m+ at 5GHz in outdoor settings. Discreet appearance can also fit with any indoor scenarios.

【Integrated into Omada SDN】Omada's Software Defined Networking (SDN) platform integrates network devices including access points, switches and gateways with multiple control options offered - Omada Hardware controller, Omada Software Controller or Omada cloud-based controller*(Contact TP-Link for Cloud-Based Controller Plan Details). Standalone mode also applies.

【Cloud Access】Remote Cloud access and Omada app brings centralized cloud management of the whole network at different sites—all controlled from a single interface anywhere, anytime.

【SDN Compatibility】For SDN usage, make sure your devices/controllers are either equipped with or can be upgraded to SDN version. SDN controllers work only with SDN Access Points, Switches & Gateways. Non-SDN controllers work only with non-SDN APs. For devices that are compatible with SDN firmware, please visit 'From the manufacturer - Q&A' section or TP-Link website.

【Advanced Wireless Tech 】Supporting the latest Mesh WiFi, Seamless Roaming, Band Steering, Airtime Fairness and Beamforming technologies.

【Multiple PoE Options for Easy Installation】Supports both 802.3af/at PoE & Passive PoE power supply, making deployment effortless and flexible.

[Point to Point Wireless Bridge]: CPE550 is a 5.8G long range WiFi extender which comply with the IEEE802.11a and IEEE802.11n standards to ensure interoperability. The 5.8G outdoor network bridge is capable of sharing internet to remote location up to 3KM (Barrier Free) and its point to point paring function save you much time and effort from complex wire setup process. It is a simple, easy and professional way for long range wireless coverage, data transmit, wireless monitoring.

[Easy Installation]: Pre-configured WiFi extender with ethernet port with build in 14dBi panel antenna, the transmit/receive (point to point) wireless distance more than 3KM meters. Suitable for long range video transmission point to point WiFi cover, it supports Wireless AP, Wireless Repeater, Bridge mode, default Pre-program WDS mode, no need setting, it can work two unit at the same time, no need long cable for connect to camera with your PC

[Long Range Transmission Distance]: Up to 3km, actual application distance should be less than 3KM. Built-in 14DBi directional antenna can significantly improve the transmission and reception performance of wireless signals. Trees will not block the transmission speed of the wireless bridge, suitable for warehouses or garages next to your house. The point to point bridge outdoor is a cool WiFi access point extender. Share the same network with your garage, barn, stable, warehouse, shop ect.

[Widely Applications]: Any place required cameras Point to Point/Multi-Point connection Client Bridge for Elevator Monitor networks. Outdoor wireless bridge router connects an IP Wireless Camera to a secondary port and utilize its long-range connectivity to send video back through the wireless network for extended coverage. This long-range wireless bridge is widely used in many venues.

[Built for Outdoor Wi-Fi Coverage]: IP66-rated weatherproof housing that ensures continued operation on harsh outdoor environments or in climates of extreme cold, heat or continuous moisture. This outdoor wireless bridge aka WiFi access point extender Can be used in any environment.Lightning Protection, Waterproof, Dustproof, Antifreeze, High-Temperature Resistant,the secondary Ethernet port can power an external device, such as a PoE security camera, for seamless IP video integration.

Fast Speeds with 2x2 MIMO — Equipped with Wireless N300 2x2 MIMO technology, the EAP110-Outdoor easily delivers Wi-Fi speeds of up to 300 Mbps.

Indoor/Outdoor Use — The durable, weatherproof enclosure protects the access point against harsh outdoor conditions and provides stable wireless coverage up to 200m plus range at 2.4GHz. Discreet appearance can also fit with any indoor scenarios.

Integrated into Omada SDN — Omada Software Defined Networking platform integrates network devices including APs, switches & gateways with multiple control options offered - Omada Hardware controller or Software Controller. Standalone mode also applies.

Cloud Access — Remote Cloud access and Omada app brings centralized cloud management of the whole network at different sites—all controlled from a single interface anywhere, anytime.

SDN Compatibility — Make sure your devices/controllers are equipped with SDN firmware. (Or upgradable). SDN controllers work only with SDN Access Points, Switches & Gateways. Non-SDN controllers work only with non-SDN APs. Details found on TP-Link website.

Passive PoE for Easy Installation — Supports Passive PoE power supply and can be powered by the provided PoE adapter, making deployment effortless and flexible.

Built in 9dBi 2x2 dual polarized directional MIMO antenna

Adjustable transmission Power from 0 to 27dBm/500mW. Power Consumption: 10.5 Watts Max, Note: When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable

System level optimizations for more than 5km long-range wireless transmission (only for paired Point-to-Point or Point-to-MultiPoint transmission)

TP Link Pharos tdma (Time Division Multiple Access) technology improves product Performance in throughput, Capacity and latency Performance

Centralized management system Pharos Control

AP/ client/ AP router/ AP client router (WISP) operation modes

Passive PoE adapter Suppots up to 60 meter (200 Feet) Power over Ethernet deployment and allows the device to be reset remotely

Connectivity technology: Wi-Fi Built In

Wave 2 MU-MIMO Improves Performance & Expands User Capacities

IP67-Rated Waterproof & Dustproof Housing Withstands Harsh Environments

11ac Dual-Radio Speeds to 867 Mbps on 5 GHz; to 400 Mbps on 2.4 GHz

Beamforming Optimizes Antenna Signal, Reception & Reliability

Four (4) External 5dbi High-Gain, 360° SMA-Type Antennas

Band Steering Optimizes Network Traffic Flow ; Fast Roaming Secures Seamless Connections

Flexible Operation Modes: AP, Client Bridge or WDS

Quickly View, Monitor & Reconfigure APs Locally or Remotely with EZ ControllerTM Software

【What KuWFi CPE200 is】an 11AC 5GHz 900Mbps wireless bridge point to point outdoor CPE Kit with ethernet port. The Wi-Fi range to up to 1KM and with LED display to configure the PT/PTMP connection, more stable Support AP and bridge operation mode, simple to built the PTP/PTMP connections, meet with multiple Wi-Fi transmission scheme demands. Outdoor Wireless CPE Bridge Waterproof, dust proof, lighting protection. Operating Temperature: -30℃-55℃ Storage Temp: -40℃-70℃

【Multiple operation mode,suit for different network & environment】 Connect an IP Surveillance Camera to CPE200’s secondary port and utilize its long-range connectivity to send surveillance video back through the wireless network for extended surveillance coverage. Tethering a series of IP Cameras to the CPE200 gives you 'eyes on' places you might not otherwise see. Easy to set CPE with IP cameras and networks DVR

【Point to Point Connection for Wireless Coverage】 Multi-Mode wireless wifi bridge with ethernet port and LED display: Support Wireless AP, Repeater operation mode; Support SSID broadcasting, Multi SSID up to 4; Support DHCP server; WiFi coverage before 2 houses with 1KM distance. It transmits via wireless WiFi, reducing the trouble of wiring cable

【Tips on product how to use 】Its LED Display can show operation mode/channel/signal strength, its H/C switch ctrl the Master/Slave units, no need to access into GUI, press reset 1s will automatic paired; avoid the complex setup program. If it is passing the wrong gateway and DNS information. You can try to put a manual IP address with Gateway address from the original modem along with your choice of DNS

【Customer Service】For 30 days after the date of purchase, return your undamaged KuWFi product and receive a full refund for ANY reason.12-month warranty for quality-related issues For 12 months after the date of purchase we take care of all quality-related issues with a REPLACEMENT OR FULL REFUND

✅【Latest WN572HP3 Outdoor Mesh WiFi Extender with 3 Chips】- This latest version WN572HP3 outdoor wifi extender adopts the updated triple chips MTK 7621DA+7603E+7613B (Can be used as a WiFi Mesh Extender), also supports the next generation of leading WiFi 802.11AC standard, which is incredible 6 times faster than Wireless-802.11N. A dual band best wifi extender for outside can boost your existing wireless WiFi coverage to Max 500 meters with speed of 2.4GHz on 300Mbps plus 5GHz on 867Mbps.

✅【IP65-Rated Weatherproof Outside WiFi Antenna Wireless Signal Booster】- Designed for Harsh Environment : IP65 rated weatherproof & heat-resistant case that ensures continued operation on harsh outdoor environments or in climates of extreme cold, heat or continuous moisture, withstanding broad ranges of humidity and temperature (-30°C~70°C) (-22°F~158°F); 15KV ESD, 4KV lightning protection, ensure a stable connection in harsh outdoor conditions.

✅【Outdoor PoE Wireless Access Point (AP) with Ethernet Port for Easy Installation】- Integrated Power over Ethernet (PoE) support, allowing it to be installed in areas where power outlet is not available by combing your power and network data connection into a single RJ-45 cable; (Multi Operation Modes) - Support WiFi Access Point, Wireless Repeater, and WiFi Mesh mode; (1000Mbps Gigabit WAN Port) - Support 10/100/1000Mbps speeds, 10x faster than a standard Ethernet port.

✅【Outdoor WiFi Range Extender Helps to Eliminate Your WiFi Dead Zone Outside】- High Power Signal Amplifiers PA+LNA 1000mW, and enhanced receiver design for more strong penetration & longer range coverage than the general outdoor access point, ideal for providing WiFi service in a big area (e.g.farm, garden, garage, backyard, etc). Get internet everywhere, eliminate WiFi dead zones, let you enjoy seamless HD streaming, online gaming, and other bandwidth-intensive task outdoors.

✅【AC1200 High Power Performance Upgraded Version for Long Range WiFi Extender Outdoor】- The next generation of WiFi, complies with IEEE 802 11 ac/a/b/g/n standards, Dual-Band maximum speed up to 5GHz 867Mbps + 2.4GHz 300Mbps, it is an upgraded version of triple chips compared with WN572HG3 dual chips MTK 7620A+7612E, in 4 x 7dBi Detachable Omni Directional Antennas.

[Wi-Fi 5 Device] Capable of speeds up to 867 Mbps on 5 GHz, 3x faster than N300 bridges

[Plug & Play Installation] Simple set up via EnWifi app or web browser

[High User Capacity] MU-MIMO improves performance & increases user device capacities

[Unrivaled Power] High 26 dB transmit power extends Wi-Fi to yard or building-to-building

[Built for Distance] High gain 19 dB integrated directional antennas extends wireless networks up to 5 miles point-to-point or point-to-multipoint

[EnWifi App] Easily set up your point-to-point application with just your smartphone or tablet